L-3 Intelligent splicing machine for:  

1, material tape material: support all kinds of material tape (paper tape, black tape, transparent tape, etc.);  

2. Thickness of material belt: support different thickness of material belt, 0.1-1.5mm thickness of material belt can be compatible;  

3, material belt width: suitable for 8mm material belt  

4, component size: the minimum can support 01005 specifications of components  

L-3 intelligent feeder can automatically splicer 8mm SMD material belt, material spacing is divided into 2mm and 4mm spacing, can be automatically identified;  When stitching the tape, ensure that the space between the materials on both sides of the interface is 2mm or 4mm. Therefore, make sure that the cut is in the middle of the two materials.  Youngpool technology L-3 intelligent feeder is based on the hole as the identification benchmark, so different belt spacing, belt forward position is different.  Youngpool technology intelligent feeder uses optical fiber or CCD image automatic identification of material spacing, the use of servo motor pulse counting, drive the material belt forward to the set position, precise cutting, maintain the material spacing.  

Youngpool Technology intelligent Splicing Machine has 3 uses, respectively:  

1, online Splicing machine -- every two production lines can save 1 employee;  

2, line edge material preparation, small material plate to aniseed plate, reduce manual online operation - - more labor saving than online feeding  

3, bin material – Splicing machine in the total bin use, more labor saving than the first two.  

The next section will give you a specific explanation of the use of the situation, welcome to pay attention to and leave a message