L-900 as SMT Industry pioneer in splicing system, not only can perfectly handle 8 ~ 24mm tape, but also has strong compatibility and the most powerful splicing passing ability. Deep pocket capability up to 9mm, strong splice tape adhesion strength of 5 kg and with the anti-torsion of 360 degrees. Therefore, L-900 is not only a intelligent splicing machine, but also a highly precise tool to improve SMT production efficiency
● Support 8, 12, 16, 24mm component tape width
● Support paper and embossed tape
● Support deep pocket up to 9mm
● Optional LCR verification for Capacitors and Resistors
● Independent X/Y/Z axis design for LCR verification
● Auto adjust LCR measurement probe for components size from 01005”
● Intelligent vision system
● Auto empty pocket detection with pre-cut stations and component pitch verification
● Excellent FPY up to 98%
● Support MES
TECHNICAL SPECIFICATIONS
|
Tape splicing system |
X axis Repeatability（mm） |
±0.01 |
|
Y axis Repeatability（mm） |
±0.01 |
|
|
Positioning Accuracy of tape（mm） |
±0.2 |
|
|
Information of component tape |
Component tape width（mm） |
8/12/16/24 |
|
Component pitch（mm） |
2/4/8/12/16/20/24 |
|
|
Component pocket depth max.（mm） |
9 |
|
|
Component tape thickness（8mm tape）（mm） |
0.25~1.25 |
|
|
Conveyor system |
Conveyor height（mm） |
930±15 |
|
Rewinding device |
rewinding arm |
Standard one rewinding arm , optional Two rewinding arms |
|
Reel Size（mm） |
Max.Ø380，Optional Ø500 |
|
|
Max. load（kg） |
Max.20 |
|
|
Decoded mode |
Barcode scanner |
Standard |
|
Barcode camera attach on rewinding arm |
Optional |
|
|
Splicing Rate |
Cycle Time (sec) |
≤10S（not including LCR test time and manual feeding time） |
|
Splicing capacity |
Splicing FPY |
98% |
|
Splicing gap（mm） |
±0.1 |
|
|
Anti-torque capacity of the material inlet |
360 degrees (plastic strap, length of the material inlet at both ends is 250mm) |
|
|
Software contro |
Automatic component pitch identification |
Standard |
|
Component size comparison |
Standard |
|
|
BOM import wizard |
Standard |
|
|
OCR |
Optional |
|
|
LCR |
Measurement accuracy |
±0.05% |
|
Measurement range |
L：0μH-1000H，C：0pF-20mF，R：0Ω-20MΩ |
|
|
Measurement method |
Two-sided measurement value |
|
|
Test pass rate |
95%（01005 Component） |
|
|
Electricity |
Power supply mode |
24V DC 50Ah Lithium battery |
|
Battery time (when fully charged)（h） |
12-16 |
|
|
Power（W） |
Max.120 |
|
|
Facilities Requirements |
Weight（Kg） |
95 |
|
Reference Dimension（mm） |
540(W) × 540(L) × 1460(H) |
|
|
Other configurations are optional |
MES customization, Barcode printer, Component reels stop function, Rotational speed sensor function, Fool-proofing function for rewinding arm, Laser height measurement function,Auto return device, Auto tape width recognition, Auto tape pitch recognition for 12-24mm tape, Direct power supply, Wireless charging, Motion platform, Heavy motion platform. |
|
Illustrations of Automatic Splicing System
[Adhesion Independent axis: vision system, LCR measurement, Splicing mechanism.]
[Carrier Pull-out design: Splicing Tape feeding system.]
[Unique Splicing Tape design:Top side bonding ONLY]
Splicing Machine Dimensions
● Published in Feb. 2024 , All Rights Reserved
● All specifications are subject to change as a result of technical developments or advances. For questions on our products, please contact Youngpool Technonlogy (information@youngpool.com) or our local representative(s)
IPv6 network supported 